Kimberly Queen Fern (Nephrolepis obliterata) Photo: Erusalio / CC BY-SA 3.0

Kimberly Queen Fern Care

Nephrolepis obliterata · Nephrolepidaceae

🐾 Pet-safe 🎯 Easy ☀️ Bright indirect 💧 Every 5–8 days
🕮 7 min read 🕓 Last reviewed: 2026-08-23

Care at a glance

Watering
Every 5–8 days
Light
Bright indirect
Temperature
16–27 °C (61–81 °F)
Humidity
Average
Soil
rich, moisture-retentive but well-draining mix
Difficulty
Easy
Mature size
60–90 cm (24–35 in)
Pet safety
Pet-safe

The short version

  • Beginner-friendly and forgiving.
  • Give it Bright indirect.
  • Water every 5–8 days.
  • Safe around cats and dogs.

The Kimberly Queen Fern (Nephrolepis obliterata) is a popular houseplant from the Nephrolepidaceae family, native to Australia. It is rated Easy to grow and typically reaches 60–90 cm indoors. Here is everything you need to keep it healthy — watering, light, humidity, feeding, propagation, and pet safety. It is a Fast grower, putting on most of its growth in the warm, bright months of spring and summer.

Also known asNephrolepis obliterataキンバリークイーンファーン金伯利皇后蕨Helecho Kimberly QueenFougère Kimberly Queen

📋Quick facts

Growth rateFast
Mature size60–90 cm (24–35 in)
Native regionAustralia
Plant familyNephrolepidaceae
ToxicityNon-toxic
Air-purifyingYes
Ideal forbeginners, homes with pets, filling a corner

⚖️Pros & cons

Pros

  • Non-toxic to cats and dogs
  • Hard to kill; great for beginners
  • Popular air-freshening pick
  • Fast, rewarding growth
  • Big, room-defining presence

Cons

    💧Watering

    Water your Kimberly Queen Fern roughly every 5–8 days, letting the top few centimetres of soil dry out between waterings. Always empty the saucer so the roots never sit in water — overwatering is the most common way this plant is lost.

    Not sure when to water? Push a finger 2–3 cm into the soil and water only when it feels dry at that depth — a cheap moisture meter or the weight of the pot works too. Water thoroughly until it runs from the drainage holes, then tip away anything left in the saucer. Soft, yellowing lower leaves usually mean too much water; crispy, curling leaves usually mean too little. Always ease off in the darker months, when the plant drinks far less.

    Never forget to water
    Adds a repeating event to Google Calendar every 7 days.
    📅 Add a watering reminder

    ☀️Light & placement

    The Kimberly Queen Fern likes bright, indirect light — near a window but out of direct midday sun, which can scorch the leaves.

    Set it right beside an east window, or just back from a south/west one behind a sheer curtain, so it gets plenty of light without direct midday rays on the leaves. Rotate the pot weekly for even growth, and dust the leaves so they can drink in the light.

    🌡️Temperature & humidity

    Keep it between 16–27 °C and away from cold draughts and heating vents. It prefers Average humidity; if your air is dry, group it with other plants or use a humidifier.

    🪴Soil & feeding

    Plant it in rich, moisture-retentive but well-draining mix. Feed with a balanced liquid feed monthly in spring and summer, and stop feeding in autumn and winter when growth slows.

    🗓️Season-by-season care

    SeasonWateringWhat to do
    Spring (Mar–May)Resume regular watering as growth restarts.The main growing season begins — start feeding again, repot if it is pot-bound, and take cuttings now for the best success.
    Summer (Jun–Aug)This is the thirstiest season; check the soil more often.Keep feeding on schedule, watch for pests in the warmth, and shield the leaves from scorching midday glass. Higher humidity is welcome.
    Autumn (Sep–Nov)Let the soil dry a little longer between waterings.Taper off feeding as growth slows, and move the plant away from cold windows and doorways before the first chills.
    Winter (Dec–Feb)Water sparingly — overwatering now is the number-one killer.Stop feeding, give it the brightest spot you have, and keep it away from radiators, heat vents, and cold draughts.

    🪟Repotting

    Repot roughly every 1–2 years, ideally in spring as growth picks up. Move up just one pot size (2–3 cm wider) with drainage holes — too big a pot holds water and invites root rot. Signs it is time: roots creeping from the drainage holes or circling the surface, water running straight through, or growth that has stalled. In the years you do not repot, scrape off and replace the top few centimetres of soil.

    ✂️How to propagate, step by step

    Spring and early summer, during active growth, give the best success. Here is how to do it, step by step:

    division at repotting

    1. Water the plant the day before to reduce stress on the roots.
    2. Slide it out of its pot and gently shake off the loose soil.
    3. Tease the root ball into sections, each with healthy roots and a few shoots.
    4. Pot each section into fresh mix at its original depth.
    5. Water them in and keep out of direct sun for a week while they recover.

    spores from mature fronds

      🔬Classification

      Plant typeFern
      GenusNephrolepis
      FamilyNephrolepidaceae · Nephrolepidaceae
      Native toAustralia

      🩺Common problems

      SymptomLikely causeWhat to do
      Brown, crispy tipsDry air, or salts and fluoride from tap waterRaise humidity and water with filtered or rested water.
      Drooping or wiltingToo little (or too much) waterCheck the soil: water if dry, ease off if soggy.

      🩺 Plant Doctor →

      🐛Pests & prevention

      The usual indoor pests are spider mites (fine webbing, speckled leaves), mealybugs (white cotton-wool tufts), scale (small brown bumps), and fungus gnats (tiny flies from soggy soil). Inspect any new plant before it joins the others, wipe the leaves now and then, and let the topsoil dry to keep gnats away. At the first sign, isolate the plant, wipe or rinse off what you can, and treat with insecticidal soap or neem oil every week until it is clear.

      🐾Is it safe for pets?

      Good news for pet owners: the Kimberly Queen Fern is considered non-toxic to both cats and dogs by the ASPCA. It is one of the safer choices for homes with animals, though eating any plant can still cause mild stomach upset.
      Toxicity information is a general guide based on ASPCA data. If your pet or child may have eaten any part of a plant, contact a vet or poison control right away.

      Frequently asked questions

      Is the Kimberly Queen Fern toxic to cats and dogs?

      No — the ASPCA lists the Kimberly Queen Fern as non-toxic to cats and dogs. Eating a lot of any plant can still cause mild stomach upset.

      How often should I water a Kimberly Queen Fern?

      About every 5–8 days — let the top few centimetres of soil dry out first, then water thoroughly and drain.

      How much light does a Kimberly Queen Fern need?

      Bright indirect. Keep it out of harsh direct midday sun unless it is a full-sun plant.

      Why does my Kimberly Queen Fern have Brown, crispy tips?

      Dry air, or salts and fluoride from tap water. Raise humidity and water with filtered or rested water.

      How often should I repot a Kimberly Queen Fern?

      About every 1–2 years, ideally in spring. Move up just one pot size when the roots fill the pot or creep out of the drainage holes.

      How fast does a Kimberly Queen Fern grow?

      It is a Fast grower, with most of its growth in the brighter, warmer months of spring and summer.

      How big does a Kimberly Queen Fern get indoors?

      Usually 60–90 cm indoors, depending on light, pot size, and how long you have had it.

      Is the Kimberly Queen Fern an air-purifying plant?

      It is one of the leafy plants often chosen to help freshen indoor air. Treat air purifying as a small bonus, not a replacement for ventilation.

      Is the Kimberly Queen Fern easy to care for?

      It is rated easy. It is very forgiving and great for beginners.

      📚Sources & further reading

      Care values reflect established horticultural guidance; toxicity is cross-referenced with the ASPCA.

      Last reviewed: 2026-08-23

      📣 Share this guide